Beyond Straight Teeth

Beyond Straight Teeth: Planning Clear Aligner Cases for Facial Esthetics · ClearForward

Beyond Straight Teeth: Planning Clear Aligner Cases for Facial Esthetics

Most clear aligner patients come in with one simple request: they want a nicer smile. They rarely ask for a corrected overbite or a level curve of Spee. They judge the result in the mirror, in photos and in everyday conversation. For this reason, the final tooth position should be decided by the face, the lips and the smile, and by any restorative work that will follow.

A generic image of straight teeth is a weak starting point for a plan. This article looks at the esthetic factors that a good clear aligner plan should account for, and at what to check before you approve one.

Start with the face, then the teeth

Alignment is always needed. A result that patients see as natural and attractive also depends on how the teeth sit within the smile and the face. Before tooth movements are decided, a plan should consider the following factors.

FactorWhat it describes
Smile arcThe curve of the upper incisal edges compared with the lower lip.
Incisor displayHow much of the upper incisors shows at rest and when smiling.
Gingival displayHow much gum shows in a full smile.
Lip supportHow the position and inclination of the incisors support the upper lip.
MidlineHow the dental midline relates to the facial midline.
Buccal corridorsThe dark spaces between the posterior teeth and the corners of the mouth.
ProfileHow incisor position affects the lips and the side view of the face.

None of these show up clearly in an occlusal view of a 3D model. They need facial photos, ideally a frontal smile photo, a photo at rest and a profile photo, taken in natural head position.

Smile arc

The smile arc describes the curve formed by the edges of the upper incisors and canines. In a pleasing smile, this curve follows the curve of the lower lip when the patient smiles. The central incisors are slightly longer than the laterals, and the line rises gradually towards the back of the mouth.

A flat or reversed smile arc makes a smile look older and less natural, even when the teeth are perfectly aligned.

Smile arcs can flatten during treatment, for example when incisors are flared to relieve crowding or when the upper incisors are intruded to open a bite. A plan should state whether the smile arc must be kept, improved or created, and the movements should support that goal.

Incisor display and gingival show

The vertical position of the upper anterior teeth controls how much tooth and gum the patient shows. Small vertical changes are very visible. When the upper incisors are extruded, the gum line moves down with them, so more tooth shows at rest and more gum shows in a smile. Even a change of 1 to 2 mm can make a balanced smile look gummy. Intruding them too much can make a smile look older, because less tooth shows at rest.

A common clinical target
  • Full display of the upper incisor crowns, with about 1 to 2 mm of gum showing during a genuine smile.
  • Some gingival display is normal and is often seen as youthful, especially in women.
  • Larger amounts, often described in the literature as more than 4 mm, are usually seen as a gummy smile.

The right target depends on the patient’s lip length, lip mobility, age and crown length. This is why vertical goals for the anterior teeth should come from the patient’s photos and not from the model alone.

Deep bite and vertical control

Deep bite correction is where esthetic goals and mechanical choices meet most directly. A deep bite can be opened by intruding the upper incisors, intruding the lower incisors and canines, extruding posterior teeth, proclining incisors, or a mix of these.

Each option changes the smile in a different way. If the patient already has good incisor display and a pleasing smile arc, intruding the upper incisors to open the bite can flatten the arc and reduce how much tooth shows. In these cases, the plan should focus on intruding the lower incisors and canines and leave the upper vertical position as it is. If the patient shows too much gum, some upper incisor intrusion may help both the bite and the smile.

Intrusion is also one of the less predictable movements with clear aligners. Studies report that only part of the planned overbite correction is achieved, with accuracy for deep bite cases often below 50%. A good plan accounts for this with suitable staging, attachments and anchorage, and with realistic expectations shared with the patient from the start.

Testing the plan against the smile

A 3D plan shows the teeth. The patient sees the smile. Some planning platforms now let clinicians align a smile photo with the 3D model and view the planned tooth positions inside the patient’s face.

An example

A plan includes extrusion of the upper incisors to close an anterior open bite. A smile simulation can show whether the final position will create too much gingival display or support a more balanced smile. If the simulation shows a problem, the vertical movements can be changed before the first aligner is made, which is far easier than correcting it with refinements later.

Smile simulation is a communication tool as well. Patients understand a picture of their own face much better than a description of tooth movements, which helps with case acceptance.

When restorations are part of the plan

Many smile makeovers combine orthodontics with veneers, crowns, bonding or implants. In these cases, the orthodontic plan should prepare the mouth for the restorative endpoint.

The usual order
  1. Design the final smile. Decide the ideal incisal edge position, tooth proportions and gingival levels, based on the face.
  2. Work out the tooth positions needed. Decide where each tooth must be for the restorations to be minimally invasive and to last.
  3. Plan the aligner movements. Stage the movements that bring the teeth into those positions.

In practice, this can mean placing the incisal edges at the right height before veneers, distributing space evenly for bonding or implants, correcting axial inclination so that restorations do not need heavy preparation, or levelling gingival margins before crown work. When teeth are placed correctly first, the restorative dentist can often remove less tooth structure, and the final result looks more natural.

This order only works when the treating dentist, the restorative dentist and the planning team agree on the endpoint before treatment begins.

An esthetic checklist before you approve a plan

Before approving a clear aligner plan, compare the final position with the patient’s facial photos and check the following.

  • Does the upper incisal curve follow the lower lip in a smile?
  • Is the planned incisor display right for this patient at rest and in a smile?
  • Will the vertical movements keep gingival display within a pleasing range?
  • Is the dental midline aligned with the facial midline, or is any difference acceptable?
  • Does arch width fill the buccal corridors without over-expansion?
  • Do the incisor inclinations support the upper lip and suit the profile?
  • If restorations will follow, does the plan create the space, edge position and inclination the restorative dentist needs?
  • Are the planned intrusion and extrusion amounts realistic for aligners, with suitable staging and attachments?

How ClearForward helps

ClearForward is a team of clinicians who have worked in clear aligner treatment planning for nearly 20 years and have reviewed more than 700,000 treatment plans. Our clinical team looks at every case with the patient’s face and smile in mind, as well as the occlusion.

With Treatment Plan Optimization® (TPO), our clinical team reviews the plan proposed in your aligner software and adjusts it to your esthetic and clinical goals. We check the smile arc, incisor display and vertical movements against the patient’s photos. We adjust movements, attachments and IPR to what the case needs, and stage the plan so that the esthetic goals are realistic with aligners. For combined orthodontic and restorative cases, we plan tooth positions around the restorative endpoint you have agreed with your team.

ClearForward is fully integrated with Invisalign and ClearCorrect and works with other aligner systems too. You receive an approval-ready plan within 48 to 72 hours.

Work with ClearForward

Planning a smile makeover or a complex anterior case?

Talk to our clinical team about your case. We plan tooth positions around the patient’s face, smile and restorative endpoint, and send you an approval-ready plan within 48 to 72 hours.

Book a conversation →
Previous
Previous

Predictable vs. Possible

Next
Next

Case Selection for Clear Aligners